IGC → STL · BUILT IN YOUR BROWSER

3D print your flight track.

Drop an IGC file. Preview your route over terrain, download one supported STL, and open it in your slicer.

Choose your IGC file

or drop your file here

IGC flight log · Processed in your browser without uploading the file.
Your flight file is processed in your browser. Terrain elevation data is fetched to build the model.

Elevation data: AWS Terrain Tiles — SRTM and GMTED2010 courtesy of the U.S. Geological Survey; EU-DEM produced using Copernicus data and information funded by the European Union.

01 / 03

Made for printing

  • 01Closed, watertight terrain base
  • 02Support struts carry the route
  • 03Single STL · drop straight into your slicer

Terrain and route are combined in one model. The STL is ready for review in your slicer before printing.

  1. 01Choose your IGC file
  2. 02Check the 3D preview
  3. 03Download STL and open in your slicer

How does it work?

Your GPS track is placed over a terrain model. Support struts connect the route to the base. Rotate and inspect the model in your browser, then download one STL.

Variograph · 3D print guide